Alkhidr International is an official authorized indentor of Styropek.
Styropek has a wide variety of products (modified and non-modified) designed to provide exceptional performance when applied to any EPS market applications. These applications include but are not limited to building and thermal insulation, shape molding, packaging, etc.
Products:
Styropek BF
Styropek BF(95)
Modified EPS bead with flame retardant and medium pentane content (average of 6%) as an expanding agent. Meets RoHS (see certifications section for more information) regulations. Available in different bead sizes to cover a wide range of applications, from low density block molding (0.63pcf) to high density shape molding with thin walls and smooth surfaces (up to 2.50pcf). For more details about our BF products and applications, please refer to the Technical Leaflets.
Product List Styropek BF(95)
| PRODUCTS | APPLICATIONS | CERTIFICATIONS |
| STYROPEK® BF - 295 | Block molding applications, low-range densities, thickness of wall >12 cm., with excellent fusion and high regrind addition. | ASTM E-84/UL-723 & CAN/ULC S102.2 for surface burning characteristics of building materials Physical Properties ASTM C-578 and CAN/ULC S701-11 ASTM D6817 for Geofoam application. Internacional Code Compliance Evaluation Service report ESR 1498 (ICC) UL 94 for flammability for parts in Devices and Appliances, rated as HF- 1 GREENGUARD UL 2818 for Chemical Emissions (VOC’s) for building materials, finishes and furnishings REACH & RoHS compliance for use as packaging material in electronic devices FMVSS 302 Flammability of materials used in the occupant compartments of motor vehicles according to DOT-US (Department of Transport of US) |
| STYROPEK® BF - 395 | Block molding applications, especially suited for fabrications requiring excellent surface appearance. | |
| STYROPEK® BF - 395S | Shape molding applications requiring modified material or high density block molding applications with excellent surface appearance. Shorter aging and cycle times than regular BF-395 product. | |
| STYROPEK® BF - 495 | Shape molding for thin walled applications with fast cycles requiring modified material. |
Styropek BFL
Styropek BFL(95)
Modified EPS beads with flame retardant and low pentane content (average of 3.7%) as an expanding agent. Meets RoHS (see certifications section for more information) regulations and helps meet gas emission restrictions applicable in different US regions, with the additional advantage of short molding cycles. Available in different bead sizes to cover a wide range of applications, from medium density block molding (0.88pcf) to high density block and shape molding with thin walls and smooth surfaces (up to 4.0pcf). For more details about our BFL products and applications, please refer to the Technical Leaflets.
Product List Styropek BFL(95)
| PRODUCTS | APPLICATIONS | CERTIFICATIONS |
| STYROPEK® BFL- 295 | Block molding applications, low and high densities requiring excellent fusion or with regrind. | ASTM E-84/UL-723 & CAN/ULC S102.2 for surface burning characteristics of building materials Physical Properties ASTM C-578 and CAN/ULC S701-11 ASTM D6817 for Geofoam application. Internacional Code Compliance Evaluation Service report ESR 1498 (ICC) UL 94 for flammability for parts in Devices and Appliances, rated as HF- 1 GREENGUARD UL 2818 for Chemical Emissions (VOC’s) for building materials, finishes and furnishings REACH & RoHS compliance for use as packaging material in electronic devices |
| STYROPEK® BFL- 395 | Block molding applications, especially suited for fabrication requiring excellent surface appearance. | |
| STYROPEK® BFL- 397 | Shape molding applications requiring modified material or high density block molding applications with excellent surface appearance. | |
| STYROPEK® BFL- 397S | Shape molding applications requiring modified material or high density block molding applications with excellent surface appearance. Shorter aging and cycle times than regular BFL-397 product. | |
| STYROPEK® BFL- 495 | Shape molding for thin walled applications with fast cycles requiring modified material. |
Styropek P(40)
Styropek P40
EPS beads without flame retardant and medium pentane content (average of 5.5%) as an expanding agent. Meets REACH and RoHS (see certifications section for more information), and also appropriate for food contact applications according to FDA regulations for polystyrene plastic components. Also available in different bead sizes to cover a wide range of applications, from low density block molding (0.63pcf) to high density block and shape molding with thin walls and smooth surfaces (up to 2.5pcf). For more details about our P40 products and applications, please refer to the Technical Leaflets.
Product List Styropek P40
| PRODUCTS | APPLICATIONS | CERTIFICATIONS |
| STYROPEK® P- 240AH | Block molding for medium and high densities, excellent fusion or with regrind and short cycle times. | FDA compliance for use as component or articles intended for used in contact with food. Articles 21CFR 177.1640 for polystyrene and 21CFR 178.3010 for blowing agent EU 10-2011 regulation compliance for plastic materials and articles intended to come in contact with food REACH & RoHS compliance for use as packaging material in electronic devices and foods |
| STYROPEK® P- 340H | Block and shape molding for high and low densities, excellent fusion or with regrind and short cycle times. | |
| STYROPEK® P- 440H | Shape molding for thin walled applications with fast cycle times. Excellent surface appearance. | |
| STYROPEK® P - 440MH | Shape molding for thin walled applications with fast cycle times. Improved surface appearance than regular P440 product. |